- Research Article
- Open access
- Published:
Detection and Parameter Estimation of Multicomponent LFM Signal Based on the Cubic Phase Function
EURASIP Journal on Advances in Signal Processing volume 2008, Article number: 743985 (2008)
Abstract
A new algorithm for the detection and parameters estimation of LFM signal is presented in this paper. By the computation of the cubic phase function (CPF) of the signal, it is shown that the CPF is concentrated along the frequency rate law of the signal, and the peak of the CPF yields the estimate of the frequency rate. The initial frequency and amplitude can be obtained by the dechirp technique and fast Fourier transform. And for multicomponent signal, the CLEAN technique combined with the CPF is proposed to detect the weak components submerged by the stronger components. The statistical performance is analyzed and the simulation results are shown simultaneously.
Publisher note
To access the full article, please see PDF.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Wang, Y., Jiang, YC. Detection and Parameter Estimation of Multicomponent LFM Signal Based on the Cubic Phase Function. EURASIP J. Adv. Signal Process. 2008, 743985 (2008). https://doi.org/10.1155/2008/743985
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1155/2008/743985