Skip to main content

Basic Holographic Characteristics of a Panchromatic Light Sensitive Material for Reflective Autostereoscopic 3D Display

Abstract

Basic holographic characteristics of a newly developed panchromatic ultrafine grain silver halide light sensitive material for RGB recording of reflective holographic screen for autostereoscopic 3D display are presented. The average grain size is less than 10 nm which ensures high resolution, diffraction efficiency, and signal-to-noise ratio (more than 100 : 1) in a large dynamic range for RGB reflective holographic recording. The decrease of the diffraction efficiency in recording of scattering objects is less than 30% from the maximal values for specular reflection. The analysis of color recording of the reflective holographic screen with one viewing zone is presented on the basis of the so-called "sandwich" structure built of two layers for multiple holographic recording in blue, green, and red spectral regions.

Publisher note

To access the full article, please see PDF.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to V. Sainov.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Petrova, T., Ivanov, B., Zdravkov, K. et al. Basic Holographic Characteristics of a Panchromatic Light Sensitive Material for Reflective Autostereoscopic 3D Display. EURASIP J. Adv. Signal Process. 2009, 217341 (2008). https://doi.org/10.1155/2009/217341

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1155/2009/217341

Keywords