Skip to main content
Figure 5 | EURASIP Journal on Advances in Signal Processing

Figure 5

From: Marker-Based Human Motion Capture in Multiview Sequences

Figure 5

Synthetic data generation process. Since the reflective markers are not distinguishable in the original RGB image (a), the sets are generated from the 3D locations provided by the MoCap system. First, for a given view , all 3D markers are projected onto the corresponding image (b), and those affected by body auto-occlusions are removed (c). Then, the marker detection algorithm is applied: some markers are missed due to the detection ratio (d), and a number of false measurements are generated (e). Finally, an amount of Gaussian noise with variance is added simulating the position estimation error.

Back to article page