Figure 2From: Sea level measurements using multi-frequency GPS and GLONASS observationsSchematic drawing of the GNSS tide gauge for SNR analysis (left) and phase delay analysis (right). For the SNR analysis, the satellite signal with elevation ε reflects off the sea surface and interferes with the direct satellite signal at the antenna, creating an interference pattern in the recorded SNR observable that can be related to the reflector height, h r . For the phase delay analysis, the phase delays of the direct and the reflected signals are recorded separately, and through geodetic analysis of the phase delay, the baseline between the antennas can be determined and related to the height of the nadir-looking antenna over the sea surface, h a , and the vertical distance between the antenna phase centers, d.Back to article page