Skip to main content
Figure 19 | EURASIP Journal on Advances in Signal Processing

Figure 19

From: Detection, 3-D positioning, and sizing of small pore defects using digital radiography and tracking

Figure 19

Pore depth ( x ) against weld length ( z ) position. The depth coordinate x against weld length coordinate z of the pores for DR CNR - and CNR + and CT at two different lower radius thresholds. The weld root enforcement height is δ0 ≈ 0.5 mm (caliper), and it is located on the detector side at high high x coordinates. Dashed lines indicate the base plate surfaces.

Back to article page