EURASIP Journal on Advances in Signal Processing

Table 4 Parameters settings of scenario 3

From: Anti-interrupted-sampling repeater jamming method based on frequency agility waveform and sparse recovery

Parameter	Value
Target 1
Time-delay	\(1047\;{\upmu s}\)
SNR	\(- 10\;\text{dB}\)
Target 2
Time-delay	\(1050\;{\upmu s}\)
SNR	\(- 10\;\text{dB}\)
Target 3
Time-delay	\(1053\;{\upmu s}\)
SNR	\(- 10\,\text{dB}\)
Jammer 1
Forwarding time	1
Modulation delay	\(2\;{\upmu s}\)
Modulation frequency	\(8\;\text{MHz}\)
JNR	\(20\;\text{dB}\)
Jammer 2
Forwarding time	1
Modulation delay	\(6\;{\upmu s}\)
Jammer sampling start time	\(2\;{\upmu s}\)
Modulation frequency	\(16\;\text{MHz}\)
JNR	\(20\;\text{dB}\)

Back to article page